Skip to main content
Call nowFree inspection
TPO Roofing on a central Kentucky property

TPO Roofing

Thermoplastic polyolefin membrane roofing for flat and low-slope commercial and residential applications.

TPO Roofing Installation in Central Kentucky, Commercial & Residential

TPO (Thermoplastic Polyolefin) has become the most widely installed commercial flat roofing membrane in North America, and for good reason. It's heat-weldable, producing seamless joints stronger than the membrane itself. It reflects UV radiation, reducing cooling loads. And it's significantly more resistant to puncture, algae, and chemical exposure than older membrane types. Velkan installs fully adhered and mechanically fastened TPO systems from top manufacturers.

What the job includes

7 items, every one of them

  • 60 mil TPO membrane, commercial grade
  • Heat-welded seams, stronger than the membrane itself
  • Fully adhered, mechanically fastened, or ballasted systems
  • ISO and polyiso insulation options
  • Tapered insulation for positive drainage
  • All penetrations flashed and boot-welded
  • ENERGY STAR rated options available

The problems behind the call

These are what turn up on commercial inspections across Madison and Clark County. If you recognise one of them, that is worth a look before it becomes the next one down the list.

  • Aged built-up or EPDM roof needing modern replacement
  • Energy costs rising due to dark, heat-absorbing roofing
  • Frequent seam failures on aging PVC membrane
aged built-up or epdm roof needing modern replacement, photographed during an inspection

Every inspection is photographed. The report you get names the component, its condition, and what it needs, so nothing rests on a verbal account of what somebody saw on your roof.

How the work runs

Same order every time, so you always know what happens next and when you are being asked to decide something.

  1. Substrate Assessment

    Existing deck condition and insulation evaluated before specifying membrane thickness and attachment method.

  2. Insulation Install

    Polyiso or ISO boards installed to required R-value and tapered for positive drainage to drains.

  3. Membrane Application

    TPO rolls applied and heat-welded by certified operators, seam widths measured and verified.

  4. Penetration Flashing

    All pipes, curbs, and walls receive prefabricated or custom-welded TPO flashings.

  5. Drain Installation

    Drain rings and clamping rings installed and torqued to specification.

TPO Roofing where you are

The work is the same trade in all three towns and a different problem in each one. Here is what drives it locally.

Richmond

Madison County

Ice damming at the eaves

January, during freeze-thaw

Madison County's hilly terrain pools cold air in the lower neighborhoods, so snowmelt refreezes at the eave and backs water up under the shingles where no amount of surface sealant reaches it.

Richmond roofing

Winchester

Clark County

Hail bruising, then algae on the north slopes

Hail March to May, algae year-round after

Winchester sits in a corridor that channels storms up from the southwest, and it sits low enough that fog settles in the mornings through spring and fall. The hail cracks the shingle mat; the standing moisture on the north-facing slopes then feeds moss and algae into the damage.

Winchester roofing

Berea

Madison County

Freezing rain and terrain-driven runoff

Late winter

The Cumberland Plateau foothills load the southern end of the county with freezing rain rather than snow, and the sloped lots around Indian Fort Mountain funnel a whole roof's runoff to a couple of eave points instead of spreading it evenly.

Berea roofing

Before you call

If yours is not here, call. Someone picks up.

859-376-0254

Quality TPO systems installed per manufacturer specification typically last 15-25 years in Kentucky's climate. The heat-welded seams are actually the strongest points in the system, failures typically occur at flashings and penetrations, which is why proper detail work matters as much as the field membrane.

TPO generally outperforms EPDM in high-UV environments because its white surface reflects heat rather than absorbing it. It also resists the thermal cycling that causes EPDM seam failures over time. However, EPDM is more forgiving on complex, penetration-heavy roofs where seaming is difficult. We assess the building and recommend the better fit.

Find out whether you need tpo roofing.

Free inspection, written report, photographs on every component. If the answer is that you do not need this work yet, that is what the report will say.

  • No cost and no obligation
  • Written report with photographs
  • We handle the insurance claim

We reply within 24 hours. Prefer to talk now? 859-376-0254